 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| DC/DC Converters TEN 3 Series, 3 Watt compliant RoHS Features Wide 2 : Input Range High Efficiency up to 84% Full SMD-Design Short-Circuit Protection Extended Operating Temperature Range -40C to 85C UL 60950-1 I/O-Isolation '500 VDC Input Filter to meet EN 55022, Class A and FCC, Level A without external Components The TEN 3 series of DC/DC converters, comprising 28 models, has been designed for a wide range of applications in industrial and communication systems. High efficiency allows an operating temperature range of - 40C to +85C. Other features of these converters are internal filtering according to EN 55022-A and FCC, level A. Full SMD-design guarantees a high reliability of this product. 24-pin DIP with Industry Standard Pinout High Reliability, MTBF >. Mio. h 3 Year Product Warranty Models Ordercode TEN 3-050 TEN 3-05 TEN 3-052 TEN 3-053 TEN 3-052 TEN 3-0522 TEN 3-0523 TEN 3-20 TEN 3-2 TEN 3-22 TEN 3-23 TEN 3-22 TEN 3-222 TEN 3-223 TEN 3-240 TEN 3-24 TEN 3-242 TEN 3-243 TEN 3-242 TEN 3-2422 TEN 3-2423 TEN 3-480 TEN 3-48 TEN 3-482 TEN 3-483 TEN 3-482 TEN 3-4822 TEN 3-4823 http://www.tracopower.com Input voltage range 4.5 - 9.0 VDC 9 - 8 VDC 8 - 36 VDC 36 - 72 VDC Output voltage 3.3 VDC 5 VDC 2 VDC 5 VDC 5 VDC 2 VDC 5 VDC 3.3 VDC 5 VDC 2 VDC 5 VDC 5 VDC 2 VDC 5 VDC 3.3 VDC 5 VDC 2 VDC 5 VDC 5 VDC 2 VDC 5 VDC 3.3 VDC 5 VDC 2 VDC 5 VDC 5 VDC 2 VDC 5 VDC Output current max. 600 mA 500 mA 250 mA 200 mA 250 mA 25 mA 00 mA 600 mA 500 mA 250 mA 200 mA 250 mA 25 mA 00 mA 600 mA 500 mA 250 mA 200 mA 250 mA 25 mA 00 mA 600 mA 500 mA 250 mA 200 mA 250 mA 25 mA 00 mA Efficiency typ. 70 % 73 % 77 % 77 % 72 % 75 % 75 % 74 % 78 % 82 % 82 % 77 % 80 % 80 % 76 % 79 % 84 % 84 % 79 % 82 % 82 % 76 % 79 % 84 % 84 % 80 % 84 % 84 % Page of 3 DC/DC Converters TEN 3 Series Input Specifications Input current no load /full load 5 12 24 48 5 12 24 48 5 12 24 48 Vin Vin Vin Vin Vin Vin Vin Vin Vin Vin Vin Vin models models models models models models models models models models models models 40 mA / 800 mA typ. 20 mA / 300 mA typ. 5 mA / 150 mA typ. 3 mA / 75 mA typ. 4 VDC / 3.5 VDC typ. 7 VDC / 6.5 VDC typ. 12 VDC / 11 VDC typ. 24 VDC / 22 VDC typ 11 V max. 25 V max. 50 V max. 100 V max. 1.0 A max. (5 V input models excluded) EN 55022 level A, FCC part 15, level A 1% - Input variation Vin min. to Vin max. - Load variation 10 - 100 % single output models dual output models balanced load dual output models unbalanced load 0.5 % max. 0.5 % max. 1.0 % max. 2.0 % max. 50 mVpk-pk max 0.02 % /K > 110% of Iout max., constant current indefinite, automatic recovery single output models 4000 F max. dual output models 1000 F max. - Operating - Case temperature - Storage - 40 C ... + 85 C + 100 C max. - 55 C ... +125C 3% /K above 70C 95 % rel H max. >1.1 Mio. h @ + 25 C 1'500 VDC 65 pF typ > 1`000 M Ohm 300 kHz typ. (Pulse frequency modulation PFM) UL 60950-1, IEC 60950-1, EN 60950-1 CSA File No. 226037 http://directories.csa-international.org - Input/Output - Input/Output - Input/Output (500 VDC) 3 Watt Start-up voltage / under voltage shut down Surge voltage (1 sec. max.) Reverse voltage protection Conducted noise (input) Output Specifications Voltage set accuracy Regulation Ripple and noise (20 MHz Bandwidth) Temperature coefficient Current limitation Short circuit protection Capacitive load General Specifications Temperature ranges Derating Humidity (non condensing) Reliability, calculated MTBF (MIL-HDBK-217E ground benign) Isolation voltage (60 sec.) Isolation capacity Isolation resistance Switching frequency Safety standards Safety approval All specifications valid at nominal input voltage, full load and +25C after warm-up time unless otherwise stated. http://www.tracopower.com Page 2 of 3 DC/DC Converters TEN 3 Series Physical Specifications Case material Potting material Weight Soldering temperature non conductive FR4 epoxy (UL 94V-0 rated) 12 g (0.42 oz) max. 265 C / 10 sec. 3 Watt Outline Dimensions mm (inches) (0.8 0.02) 23 Bottom view 23 22 9 1 1 (0.6) (0.8 0.02) Pin-Out Pin 2 3 9 4 6 22 23 Single -Vin (GND) -Vin (GND) No pin No con. +Vout -Vout +Vin (Vcc) +Vin (Vcc) Dual -Vin (GND) -Vin (GND) Common -Vout +Vout Common +Vin (Vcc) +Vin (Vcc) 15.24 16 14 2.4 0.5 (0.1 0.02) 10.2 0.5 2.54 (0.1) 20.3 0.5 5.0 15.24 (0.6) 5.08 (0.2) 4.5 0.5 (0.18 0.02) 22.86 32 0.5 (0.9) (1.25 0.02) Pin diameter o 0.5 0.05 (0.02) 0.002 Tolerances 0.5 (0.02) Specifications can be changed any time without notice Rev. 09/06 Jenatschstrasse 1 * CH-8002 Zurich * Switzerland Tel. +41 43 311 45 11 * Fax +41 43 311 45 45 * info@traco.ch * www.tracopower.com (0.2) (0.4 0.02) Page 3 of 3 |
Price & Availability of TEN3-051006
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |